AT-100 Available in L, S, C and X – Bands, the AT-100 provides a minimum of 2W of power into any load. A low power selection is available for applications were power consumption is critical or link margin is sufficient. Packaged in a rugged aluminum housing, the single-board electronics construction lends the AT Series to applications where severe environmental conditions are the norm. Frequency selection is controlled by a sixteen-position selector switch or by an optional BCD code plug for remote control in 1 MHz steps. An optional cut-and-rotate scrambler is integral to the receiver. A comprehensive front panel 9-pin connector provides quick and easy integration into any system without expensive specialized connectors. Two balanced audio subcarriers may be factory selected to any frequency between 5.5 to 7.5 MHz and configured for either microphone or line level. Video and audio pre-emphasis may be set to either the NTSC or PAL standard. The AT Series transmitter is well suited for applications in Homeland Security, surveillance, law enforcement, UAV and RPV, remote broadcast, video production, and airborne data/telemetry.
Overview:The AT Series from Pacific Microwave Research brings a new level of performance and reliability to video and audio transmission. Available in L, S, C and X – Bands, the AT-100 provides a minimum of 2W of power into any load. 
|